22 Oct 5 Tips For At-Home Grass Installation In Australia
The phenomenon of replacing real grass with the artificial one has been gaining a lot of momentum in Australia due to associated monetary and maintenance advantages it offers in the routine lives. For instance, you do not have to water it daily resulting into cutting water bills to some extent; similarly, you do not have to mow it or fertilise it or to use insect repellent on it, to name a few. In addition, your garden looks lush and green throughout the year without having any wear and tear or dab look that unattended grass gives you after a while.
When it comes to artificial grass then the most critical part is the installation of it as the method of pasting grass in concrete would be entirely different from that of the already existing lawn. Hence, it is of paramount importance that the base or ground is well prepared before applying any grass patches on it. The rule of thumb is to seek guidance from the local professional in this regard, the Lush Turf Solutions has been providing top quality artificial grass as well as support services across Australia since long, the best thing about them is the site visits that they offer through their team of experts in order to have a better idea about the ground or base before prescribing any solutions or installation options.
Generally, installing grass is a highly professional task and should be undertaken through a professional only but if you intend to go all DIY on it even then it is recommended to seek advice from an expert to guide you through the process then you can carry on in your own way around it.
Considering these, below are given a few tips that one must bear in mind regarding the subject matter, such as:
Granite Or Limestone For Laying Course
The first tip for your DIY artificial grass installation in Australia is you would have to prepare the sub-base and a laying course in order to make the latex grass stick stably to the base. The general rule of thumb is to use 10-12 mm of limestone or granite chippings as a sub-base if the ground is not marred by the poor drainage system else go with a 60-70mm option. However, for laying course you need to use granite or limestone dust at 0-6 mm in diameter up to 25 mm depth to form a good laying course beneath the grass. Few people opt for sharp sand as a substitute to the granite and limestone due to low cost but do not do that as these are prone to damages and corrosion of the grass in the short to long run depending upon the exposure to water.
Weed Membrane Is A Must
The second tip to install artificial grass Australia is to ensure that weed does not grow on it. For this purpose, you need to lay a weed membrane on the ground from where previous lawn has been excavated then above the aggregates and laying course so no such thing as the weed could sprout above the ground among your artificial grass patches.
Acclimatise The Grass
When you would receive your rolls of artificial grass Australia from the factory you need to make these acclimatise in order to ensure proper and tight fit. This step is particularly important if you are in DIY-ing it. You can do the acclimatisation by laying the grass open on the surface or laying course where it has to be placed for at least 24 hours; so the ripples and ridges could be turned flat if any through the warmth of the sun on latex. Otherwise, you will find it difficult to set it properly fit at the surface, this usually happens with contractors who have to meet a deadline and usually run short on time.
Silica Sand Infill
You should opt for silica sand infills for your DIY artificial grass installation because it would provide proper support to the grass and avoid any possibility of ridges in the patches, also it prevents water drainage and also offers enhanced fire resistance, etc.
Foam Underlay For Concrete/Decking
While installing grass directly on a concrete structure or on the decking, it is recommended to put a foam underlay between the artificial grass and the base to prevent undulation or to mask any kind of unevenness from below the surface.
These are the golden rules that one must follow if doing the task itself at home, however, consultation with the professional always helps in doing the job at hand in a better and more equipped way.